GFB VTA Performance Blow Off Valve for VW & Audi w/ Pierburg DV

If you want sound with your performance (or performance with your sound!), GFB’s T9481 VTA delivers! By combining atmosphere venting with the proven performance benefits of our ground-breaking DV+, the VTA delivers an aggressive blow-off sound,...

IE HPFP Upgrade Kit for Audi C7/C7.5 S6, S7 & RS7

Our premium HPFP internals kit for your Audi 4.0TT V8 engine upgrades both factory high-pressure fuel pumps with performance high-flow internals. Leading-quality components and strict QC process will reliably increase the fuel delivery from your stock...

JXB Performance Cylinder on Demand (Cylinder Deactivation) Solenoid Delete Plugs for Audi 4.0T

These handy plugs seal up the holes when you remove your COD solenoids. Set of 17. 16 for the holes and 1 for when you inevitably drop one in to Never Never Land. 17th converts to a keychain as a reward if you don’t lose one. Before deleting your...

034Motorsport Active Motor Mount Resistor Bypass for EA839 3.0T/2.9T & EA824 4.0T

Looking to remove that pesky soft code caused by replacing your failure-prone Audi “active” mounts? Our plug-in resistor bypass solves this issue and removes the soft codes caused by replacing the failure-prone factory "active" mounts when...

034Motorsport High Pressure Fuel Pump Piston Tool for EA888 Gen 3 2.0T & C7/C7.5 4.0T

The 034Motorsport High Pressure Fuel Pump Tool is designed to make the disassembly and reassembly of EA888 Gen 3 2.0T & C7/C7.5 S6/S7/S8/RS7 4.0T high pressure fuel pumps a breeze! This tool was designed for ease of use with a 1/2” ratchet...

GFB DV+ Diverter Valve w/ Integrated Solenoid

The T9381 is the latest addition to the DV+ family, and offers all the benefits you’d expect from a DV+: Sharper throttle response Faster boost recovery after gearshift or brief throttle lift Improved boost holding Unrivalled longevity, backed...

034Motorsport S34 Carbon Fiber Intake for C7/C7.5 S6 & S7

THIS ITEM CAN NOT BE SHIPPED TO CALIFORNIA CUSTOMERS! NOTE: this intake is designed to be used with OE size turbo inlets Significant effort went into developing this comprehensive performance-improving intake solution for the Twin-Turbocharged 4.0T EA824...

IE Carbon Fiber Intake System for C7/C7.5 S6 & S7

THIS ITEM CAN NOT BE SHIPPED TO CALIFORNIA CUSTOMERS! PERFORMANCE • SOUND • ASTHETICS The IE air intake system for your Audi S6 or S7 4.0TT engine is the result of extensive engineering methods to validate a truly unique performance...

IE HPFP Assembly Tool for MQB 2.0T & C7 4.0TT

EASY HPFP INSTALL Upgrading your factory VW/Audi MQB 2.0T or C7/C7.5 4.0TT HPFP with higher flow fuel pump internals? Disassembly & assembly of the factory HPFP housing requires a specialty tool to unthread the internal body from the fuel pump body...

034Motorsport TrackSport Engine Mount Pair for C7 S6, S7 & RS7 & D4 A8 & S8 4.0T

The 034Motorsport Motorsport Tracksport Engine Mount Pair for the C7/C7.5 Audi S6/S7/RS7 and D4 A8/S8 with the 4.0T are the new standard in ultra-high performance mount solutions. These mounts are designed with extreme performance in mind, manufactured...

Milltek Non-Resonated & Valved Catback Exhaust for C7 S6 & S7 (Louder)

*Fitment Note: Some 2016 and later models have an updated valve location on one rear silencer meaning the wiring loom needs extending to accommodate.* Our range of Cat-Back systems are perfectly suited to cater for anyone looking to improve their sound...

Milltek Resonated & Valved Catback Exhaust for C7 S6 & S7 (Quieter)

*Fitment Note: Some 2016 and later models have an updated valve location on one rear silencer meaning the wiring loom needs extending to accommodate.* Our range of Cat-Back systems are perfectly suited to cater for anyone looking to improve their sound...

Milltek Non-Resonated Non-Valved Catback Exhaust for C7 S6 & S7 (Louder)

*Fitment Note: Recommended with Valve Delete Modules SSXAU405 to prevent ECU fault codes* Our range of Cat-Back systems are perfectly suited to cater for anyone looking to improve their sound and aesthetics, designed as a direct replacement for the...

Milltek Resonated Non-Valved Catback Exhaust for C7 S6 & S7 (Quieter)

*Fitment Note: Recommended with Valve Delete Modules SSXAU405 to prevent ECU fault codes* Our range of Cat-Back systems are perfectly suited to cater for anyone looking to improve their sound and aesthetics, designed as a direct replacement for the...

Milltek Exhaust Valve Delete Modules for MK7/7.5 Golf R, 8V S3 & C7 S6 & S7

Recommended for fitment with non-valved Milltek Sport Cat-Back Systems Part list 2 x MSVALVEDEL: Valve Delete Module