034Motorsport Active Motor Mount Resistor Bypass for EA839 3.0T/2.9T & EA824 4.0T

Looking to remove that pesky soft code caused by replacing your failure-prone Audi “active” mounts? Our plug-in resistor bypass solves this issue and removes the soft codes caused by replacing the failure-prone factory "active" mounts when...

Genuine VW / Audi Oil Drain Plug Crush Washer for Metal Oil Pan

Doing an oil change the old school way? Replace the drain plug crush washer! We've got you covered with a Genuine VW / Audi part! We are sourcing the crush washers directly from a local VW dealership, so you're guaranteed a genuine...

034Motorsport Carbon Fiber Engine Cover Trim for C8 RS6 & RS7

034Motorsport's Carbon Fiber Engine Cover Trim for the C8 RS6/RS7 is designed to tastefully complement the factory engine bay with a beautiful carbon fiber weave that matches other aftermarket carbon fiber.This genuine carbon fiber cover is an overlay...

IE Catback Exhaust System for C8 RS6 & RS7

The IE Catback Exhaust System for your Audi C8 RS6 or RS7 incorporates our in-house engineered DroneTrap technology to eliminate drone and deliver the aggressive sound expected from a V8 engine. Engineered with cutting-edge design features including...

IE Turbo Inlet Pipes for C8 RS6 & RS7

THIS ITEM CAN NOT BE SHIPPED TO CALIFORNIA CUSTOMERS! IE Turbo Inlet Pipes are designed specifically for your 2021-2022 Audi RS6 or RS7, delivering a comprehensive boost to the IE Air Intake System with further improved airflow. Providing an...

IE Carbon Fiber Intake System for C8 RS6 & RS7

THIS ITEM CAN NOT BE SHIPPED TO CALIFORNIA CUSTOMERS! The IE Carbon Fiber Intake System for your Audi C8 RS6 or RS7 has been engineered for performance first through extensive airflow analysis and design testing. Get ready to experience massive...

034Motorsport High Output Ignition Coil Replacement Rubber Boot

The 034Motorsport High Output Ignition Coil Replacement Rubber Boot is designed to replace the rubber boot that comes with the 034Motorsport High Output Ignition Coils or OEM Ignition Coils for EA8XX Engines.If rubber boots are damaged or torn,...

Milltek Upgrade Kit to Signature Series Titanium Axle Back System for C8 RS6 & RS7 w/ Milltek Exhaust

Upgrade Kit to Signature Series Titanium Axle Back System from any existing Milltek Sport Stainless Options Parts list 1 x MSSAU100: LH Connecting Pipe 1 x MSSAU101: RH Connecting Pipe 1 x MSSAU102: LH Rear Silencer 1 x MSSAU103: RH...

Milltek Carbon Fiber Tips for C8 RS6 & RS7 w/ Milltek Exhaust

Optional Carbon Fibre Trims (Replaces MSTIP269/270 or MSTIP271/272) Parts list 1 x MSTIP295: LH Carbon Trim 1 x MSTIP296: RH Carbon Trim

Milltek Rear Trim Finisher Plates for C8 RS6 & RS7 w/ Milltek Exhaust

Optional Rear Trim Finisher Plates (Cerakote Black Finish) - Covers the back of the floating trims

Milltek Front Silencers for C8 RS6 & RS7 w/ Milltek Catback

Our range of Cat-Back systems are perfectly suited to cater for anyone looking to improve their sound and aesthetics, designed as a direct replacement for the original system, available in multiple configurations enabling the owner to choose the increase...

Milltek Non-Resonated Catback Exhaust for C8 RS6 & RS7 (Louder) - No Cutting Required

*Please Note: Does not require cutting of the OE System* Our range of Cat-Back systems are perfectly suited to cater for anyone looking to improve their sound and aesthetics, designed as a direct replacement for the original system, available in multiple...

Milltek Non-Resonated Catback Exhaust for C8 RS6 & RS7 (Louder) - Requires Cutting of OE System

*Please Note: Requires OE system to be Cut - Designed for Customers who will be upgrading to Turbo Back in the Future* Our range of Cat-Back systems are perfectly suited to cater for anyone looking to improve their sound and aesthetics, designed as a...

Milltek Resonated Catback Exhaust for C8 RS6 & RS7 (Quieter) - No Cutting Required

*Please Note: Does not require cutting of the OE System* Our range of Cat-Back systems are perfectly suited to cater for anyone looking to improve their sound and aesthetics, designed as a direct replacement for the original system, available in multiple...

Milltek Resonated Catback Exhaust for C8 RS6 & RS7 (Quieter) - Requires Cutting of OE System

*Please Note: Requires OE system to be Cut - Designed for Customers who will be upgrading to Turbo Back in the Future* Our range of Cat-Back systems are perfectly suited to cater for anyone looking to improve their sound and aesthetics, designed as a...