034Motorsport Active Motor Mount Resistor Bypass for EA839 3.0T/2.9T & EA824 4.0T

Looking to remove that pesky soft code caused by replacing your failure-prone Audi “active” mounts? Our plug-in resistor bypass solves this issue and removes the soft codes caused by replacing the failure-prone factory "active" mounts when...

034Motorsport Density Line Front Sway Bar End Links for Audi B8, B9, C7, C8, D4, D5, 4L, 4M, 4M8, Porsche E3 & 95B, Bentley Bentayga & Lamborghini Urus

Replace your flimsy, imprecise OEM sway bar end links with these performance-engineered Density Line Front Sway Bar End Links from 034Motorsport! Designed to improve handling, road feel, and steering response, 034Motorsport's Front Sway Bar End Links...

034Motorsport Density Line Control Arm for Audi C8, D5 & 4M/4M.5

034Motorsport's complete Density Line Control Arm Kit with Upper Adjustable or Non-Adjustable Control Arms are designed to be performance replacements for all eight of the factory front upper and lower control arms. The result is tighter handling and...

034Motorsport Density Line Lower Control Arm for Audi C8, D5 & 4M/4M.5

The factory front lower control arms are an integral part of the Audi C8, D5, & 4M/4M.5 Chassis suspension, but can start wearing out as early as 40,000 miles - even on vehicles that see mainly highway commuting miles, trips to the local mall, and...

034Motorsport Billet Aluminum Front Strut Brace for Audi C8

The factory Audi C8 A6/S6/RS6/Allroad & A7/S7/RS7 strut brace is made of thin stamped & hollow aluminum tubing, allowing for lateral deflection of the strut towers and chassis flex under hard cornering. This deflection can be observed as...

Genuine VW / Audi Oil Drain Plug Crush Washer for Metal Oil Pan

Doing an oil change the old school way? Replace the drain plug crush washer! We've got you covered with a Genuine VW / Audi part! We are sourcing the crush washers directly from a local VW dealership, so you're guaranteed a genuine...

034Motorsport Carbon Fiber Engine Cover Trim for C8 RS6 & RS7

034Motorsport's Carbon Fiber Engine Cover Trim for the C8 RS6/RS7 is designed to tastefully complement the factory engine bay with a beautiful carbon fiber weave that matches other aftermarket carbon fiber.This genuine carbon fiber cover is an overlay...

034Motorsport 5x112 12.5mm Wheel Spacer Pair - 66.6mm Centerbore

The 034Motorsport 12.5mm Wheel Spacer Pair is designed to fit most Audi & BMW vehicles with a 66.6mm center bore and 5x112mm wheel bolt patterns. These wheel spacers are manufactured from 6061 billet aluminum with a black anodized finish for maximum...

034Motorsport 5x112 2.5mm Wheel Spacer Pair - 66.6mm Centerbore

The 034Motorsport 2.5mm Wheel Spacer Pair is designed to fit most Audi & BMW vehicles with a 66.6mm center bore and 5x112mm wheel bolt patterns. These wheel spacers are manufactured from 6061 billet aluminum with a black anodized finish for maximum...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 47mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 47mm length, commonly used with 20mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 47mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 47mm length, commonly used with 20mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 45mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 45mm length, commonly used with 15mm - 17.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 45mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 45mm length, commonly used with 15mm - 17.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 40mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 40mm length, commonly used with 12.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 40mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 40mm length, commonly used with 12.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...