034Motorsport CREC Supercharger Pulley Upgrade for C7.5 A6/A7, D4 A8 & 4M Q7

At 57.70mm in diameter, the 034Motorsport CREC 3.0 TFSI Supercharger Pulley is significantly smaller than the factory unit in order to increase the drive ratio of the supercharger. Spinning the supercharger faster yields increased boost pressure...

034Motorsport Density Line Front Sway Bar End Links for Audi B8, B9, C7, C8, D4, D5, 4L, 4M, 4M8, Porsche E3 & 95B, Bentley Bentayga & Lamborghini Urus

Replace your flimsy, imprecise OEM sway bar end links with these performance-engineered Density Line Front Sway Bar End Links from 034Motorsport! Designed to improve handling, road feel, and steering response, 034Motorsport's Front Sway Bar End Links...

034Motorsport High Pressure Fuel Pump Piston Tool for EA888 Gen 3 2.0T & C7/C7.5 4.0T

The 034Motorsport High Pressure Fuel Pump Tool is designed to make the disassembly and reassembly of EA888 Gen 3 2.0T & C7/C7.5 S6/S7/S8/RS7 4.0T high pressure fuel pumps a breeze! This tool was designed for ease of use with a 1/2” ratchet...

GFB DV+ Diverter Valve w/ Integrated Solenoid

The T9381 is the latest addition to the DV+ family, and offers all the benefits you’d expect from a DV+: Sharper throttle response Faster boost recovery after gearshift or brief throttle lift Improved boost holding Unrivalled longevity, backed...

034Motorsport Billet CREC Supercharger Clutch Delete Kit

The 034Motorsport Billet CREC Supercharger Clutch Delete Kit is engineered to replace the failure-prone factory clutch system on CREC-equipped Audi 3.0T engines. The factory supercharger clutch system on CREC-equipped Audi 3.0T’s can wear out over...

034Motorsport 5x112 12.5mm Wheel Spacer Pair - 66.6mm Centerbore

The 034Motorsport 12.5mm Wheel Spacer Pair is designed to fit most Audi & BMW vehicles with a 66.6mm center bore and 5x112mm wheel bolt patterns. These wheel spacers are manufactured from 6061 billet aluminum with a black anodized finish for maximum...

034Motorsport 5x112 2.5mm Wheel Spacer Pair - 66.6mm Centerbore

The 034Motorsport 2.5mm Wheel Spacer Pair is designed to fit most Audi & BMW vehicles with a 66.6mm center bore and 5x112mm wheel bolt patterns. These wheel spacers are manufactured from 6061 billet aluminum with a black anodized finish for maximum...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 47mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 47mm length, commonly used with 20mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 47mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 47mm length, commonly used with 20mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 45mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 45mm length, commonly used with 15mm - 17.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 45mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 45mm length, commonly used with 15mm - 17.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 40mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 40mm length, commonly used with 12.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 40mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 40mm length, commonly used with 12.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 38mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 33mm length, commonly used with 5mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 37mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 37mm length, commonly used with 10mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...