SPC Front Adjustable Upper Control Arm Kit for Audi B8 & C7

Adjust front camber and caster ±1.5° on the Audi B8 and C7 platforms with these forged aluminum adjustable control arms from SPC. OE style booted ball joints and bonded rubber bushings maintain factory ride, handling and noise, vibration,...

JXB Performance ARP Rear Differential Hardware Kit for Audi B8/C7/D4

Reinforces the critical hardware in your driveline. This kit replaces the 12 rear axle to differential and 6 driveshaft to differential bolts. Our bolts are Chromoly 8740 from ARP specially machined to fit the rear end of B8, C7, and D4 Audis...

Injen Cold Air Intake System for C7 A6 & A7 3.0T

Is your engine choking for air and in need of some additional horsepower? If so, Injen has exciting news for you! The SP series of cold air intakes from Injen Technology will allow your engine to breathe deeper and enhance the performance that...

BLOX Racing Neoprene Coilover Covers (Pair)

BLOX Racing Coilover Covers are made from heavy duty neoprene and feature hand-stitched hems for additional durability. The tops and bottoms of each cover feature elastic hems that help secure them around the coilover springs. Fits BLOX Racing Tuner,...

034Motorsport CREC Supercharger Pulley Upgrade for C7.5 A6/A7, D4 A8 & 4M Q7

At 57.70mm in diameter, the 034Motorsport CREC 3.0 TFSI Supercharger Pulley is significantly smaller than the factory unit in order to increase the drive ratio of the supercharger. Spinning the supercharger faster yields increased boost pressure...

034Motorsport Density Line Front Sway Bar End Links for Audi B8, B9, C7, C8, D4, D5, 4L, 4M, 4M8, Porsche E3 & 95B, Bentley Bentayga & Lamborghini Urus

Replace your flimsy, imprecise OEM sway bar end links with these performance-engineered Density Line Front Sway Bar End Links from 034Motorsport! Designed to improve handling, road feel, and steering response, 034Motorsport's Front Sway Bar End Links...

034Motorsport High Pressure Fuel Pump Piston Tool for EA888 Gen 3 2.0T & C7/C7.5 4.0T

The 034Motorsport High Pressure Fuel Pump Tool is designed to make the disassembly and reassembly of EA888 Gen 3 2.0T & C7/C7.5 S6/S7/S8/RS7 4.0T high pressure fuel pumps a breeze! This tool was designed for ease of use with a 1/2” ratchet...

034Motorsport Supercharger Heat Exchanger Upgrade Kit for C7/C7.5 A6 & A7

The 034Motorsport Supercharger Heat Exchanger Upgrade Kit for the Audi C7/C7.5 is an excellent stock-location heat exchanger for the Audi C7/C7.5 A6/A7. Testing has proven that this heat exchanger upgrade is capable of significantly reducing intake air...

034Motorsport Billet CREC Supercharger Clutch Delete Kit

The 034Motorsport Billet CREC Supercharger Clutch Delete Kit is engineered to replace the failure-prone factory clutch system on CREC-equipped Audi 3.0T engines. The factory supercharger clutch system on CREC-equipped Audi 3.0T’s can wear out over...

034Motorsport 5x112 12.5mm Wheel Spacer Pair - 66.6mm Centerbore

The 034Motorsport 12.5mm Wheel Spacer Pair is designed to fit most Audi & BMW vehicles with a 66.6mm center bore and 5x112mm wheel bolt patterns. These wheel spacers are manufactured from 6061 billet aluminum with a black anodized finish for maximum...

034Motorsport 5x112 2.5mm Wheel Spacer Pair - 66.6mm Centerbore

The 034Motorsport 2.5mm Wheel Spacer Pair is designed to fit most Audi & BMW vehicles with a 66.6mm center bore and 5x112mm wheel bolt patterns. These wheel spacers are manufactured from 6061 billet aluminum with a black anodized finish for maximum...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 47mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 47mm length, commonly used with 20mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 47mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 47mm length, commonly used with 20mm wheel spacers. The 17mm head will be the same as stock, so you can still use factory lug...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 45mm Length - Cone Seat

This extended wheel bolt is recommended for those using aftermarket wheels, which will typically require a conical seat. 45mm length, commonly used with 15mm - 17.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use...

EMD Auto Extended Wheel Bolt M14 x 1.5 - 45mm Length - Ball Seat

This extended wheel bolt is recommended for those using stock Audi/VW wheels, which will typically require an R13 ball seat. 45mm length, commonly used with 15mm - 17.5mm wheel spacers. The 17mm head will be the same as stock, so you can still use...