034Motorsport Billet Spherical Dogbone Mount Hardware Kit for 8S TTRS & 8V/8V.5 RS3

Complete factory dogbone bolt kit for the 8S Audi TT RS & 8V/8V.5 Audi RS3. We recommend using these new factory stretch bolts to install the 034Motorsport's Billet Spherical Dogbone Mount. WHAT'S INCLUDED: N91201001 - Bolt, Hex Head, M14x1.5x50 -...

BFI Torque Arm Insert for MQB - Stage 2 - V2

*Disclaimer - Please verify which mount type you have (1 or 2) by going under the vehicle to check. VAG has been using either mount with no rhyme or reason to year, model, or trim. Thank you.* Our Stage 2 Torque Arm Insert is aimed at maximizing...

BFI Torque Arm Insert for MQB - Stage 2 - V1

*Disclaimer - Please verify which mount type you have (1 or 2) by going under the vehicle to check. VAG has been using either mount with no rhyme or reason to year, model, or trim. Thank you.* Our Stage 2 Torque Arm Insert is aimed at maximizing...

BFI Torque Arm Insert for MQB - Stage 1 - V2

*Disclaimer - Please verify which mount type you have (1 or 2) by going under the vehicle to check. VAG has been using either mount with no rhyme or reason to year, model, or trim. Thank you.* Our Stage 1 Torque Arm Insert is aimed at maximizing daily...

BFI Torque Arm Insert for MQB - Stage 1 - V1

*Disclaimer - Please verify which mount type you have (1 or 2) by going under the vehicle to check. VAG has been using either mount with no rhyme or reason to year, model, or trim. Thank you.* Our Stage 1 Torque Arm Insert is aimed at maximizing daily...

JXB Performance Driveshaft Center Support Bearing Carrier Upgrade for MQB AWD

Holds the driveshaft where it should be. Isolation dampers minimize vibrations. THE PROBLEM The stock center support bearing carrier holds the driveshaft in place with rubber so thin about 20 lbs of force moves it from center to the end of its...

APR Billet Pendulum Mount for MQB 7 Speed DQ381

*Fitment Note: Does NOT fit vehicles with the 6 Speed Manual or 6 Speed DQ250 transmission* The APR Pendulum mount replaces the factory mount with a new, thick, billet-aluminum and billet-stainless-steel two-piece design, featuring a PTFE-lined...

APR Stainless Steel Dogbone Mount Insert for MQB

*Please visually check the application guide for proper fitment as there are multiple subframe options. Always replace your factory 1-time use subframe bolt!* The APR Billet Stainless-Steel Dogbone / Subframe Mount Insert limits driveline movement, which...

034Motorsport Compact Fluid Cooler

Small compact cooler for power steering, transmission, fuel or oil use. Compact 9x3" size fits anywhere and replaces OE unit or supplements cooling.  Uses 5/16" 8mm fittings, includes hose, clamps and mounting tie straps.

Neuspeed Engine Torque Arm Insert for MQB

Under hard acceleration, your entire engine and transmission actually rotate due to compliance with the factory bushings. While the soft factory bushings do a good job of damping engine vibration, they can also create a rubbery, vague response in the...

Mishimoto Universal Transmission Cooler & Power Steering Cooler

Features: Universal mounting for use in any application Allows the use of Mishimoto aluminum radiators on automatic transmission cars Efficient, lightweight, tube-and-fin design promotes dramatic fluid temperature drops Applicable for use with...