034Motorsport Dogbone Mount Hardware Kit for MK5, MK6, 8J & 8P

Factory dogbone bolt kit for the MkV/MkVI Volkswagen and 8J/8P Audi. We recommend using these new factory stretch bolts when installing a new dogbone mount pair or the 034Motorsport's Billet Spherical Dogbone Mount. WHAT'S INCLUDED: N10558002 - Bolt,...

Assembled by INS Motor & Transmission Mount Hardware Kit for 8P A3 3.2L & MK5 R32

Plan on removing or replacing your mounts? Don't re-use your old hardware! VW & Audi chose to use one time use torque-to-yield hardware, also referred to as stretch bolts, for much of their hardware. This hardware is not meant to be re-used and...

034Motorsport Dynamic+ DQ250 DSG Software Upgrade for MK5/MK6 VW & 8J/8P Audi

034Motorsport is proud to offer Stage 1 and Stage 2 DSG Software Upgrades for MkV/MkVI Volkswagen & 8J/8P Audi models equipped with the DQ250 transmission! Stage 1: Increased DSG Clutch Clamping Force No Kickdown Downshifts in Manual Mode Launch...

BFI Motor Mount Hardware for Complete Replacement Mounts

Did you buy a used BFI mount that didn't come with hardware? Lose the hardware we originally provided? No worries, we've got you covered!  This is a hardware kit for MK4/MK5/MK6/MK7 BFI Complete Replacement Engine and Transmission Mounts, as well as...

BFI Transmission Mount Inserts - Stage 3

Stage 3 transmission mount bushings are designed for those individuals that value performance first, and comfort and ride as a secondary goal. Focused for those who have high horsepower engines, and track-focused vehicles. Great for the road coarse...

BFI Transmission Mount Inserts - Stage 2

These inserts give you the option to upgrade or downgrade as you see fit without having to purchase a completely new mount. Both upper and lower inserts are included. These inserts will work with all MK4, MK5, MK6, MQB, and Audi 8J, 8S, 8P, and...

BFI Transmission Mount Inserts - Stage 1

These inserts give you the option to upgrade or downgrade as you see fit without having to purchase a completely new mount. Both upper and lower inserts are included. These inserts will work with all MK4, MK5, MK6, MQB, and Audi 8J, 8S, 8P, and...

BFI Transmission Mount for MK5 & MK6 w/ 6 Speed Manual / DSG - Stage 2

Prevent excessive engine movement with these upgraded engine mounts. Even new factory mounts are not up to the task of handling the increased power from even lightly modified engines (software) and often they start to fail within less than 10k miles. Our...

BFI Transmission Mount for MK5 & MK6 w/ 6 Speed Manual / DSG - Stage 1

Prevent excessive engine movement with these upgraded engine mounts. Even new factory mounts are not up to the task of handling the increased power from even lightly modified engines (software) and often they start to fail within less than 10k miles. Our...

BFI Engine Mount Kit for MK5/MK6 6 Cylinder - Stage 2

Prevent excessive engine movement with these upgraded engine mounts. Even new factory mounts are not up to the task of handling the increased power from even lightly modified engines (software) and often they start to fail within less than 10k miles. Our...

BFI Engine Mount Kit for MK5/6 6 Cylinder - Stage 1

Prevent excessive engine movement with these upgraded engine mounts. Even new factory mounts are not up to the task of handling the increased power from even lightly modified engines (software) and often they start to fail within less than 10k miles. Our...

JXB Performance Driveshaft Center Support Bearing Carrier Upgrade for VW Mk5 R32/Mk6 Golf R & Audi 8P A3

Holds the driveshaft where it should be. Isolation dampers minimize vibrations. THE PROBLEM The stock center support bearing carrier holds the driveshaft in place with rubber so thin about 20 lbs of force moves it from center to the end of its...

APR Spherical Pendulum Mount for PQ35

The APR Pendulum mount replaces the factory mount with a new, thick, billet-aluminum two-piece design, featuring a PTFE-lined spherical bearing and ARP® bolts. The system stiffens the driveline to improve shift quality and power transition, while...

APR Shifter Cable Bracket for MK5, MK6 & MK7 6 Speed

Through countless years of professional racing, APR Motorsport identified the factory shifter cable bracket system as a source of sloppy shifts, missed gears, bracket and bushing failure and even transmission failure. The factory shifter cable bracket is...

Wavetrac Front Differential for Early 02E DQ250 AWD 6 Speed DSG (20T Ring)

Note on DSG parking brake toothed ringsWavetrac diffs are state-of-the-art helical gear differentials designed, developed, and manufactured in the USA by Autotech Driveline. The Wavetrac Differential is the only torque biasing differential on the market...