Product Description
Assembled by INS Suspension Hardware Kit for MQB & MQB Evo
Are you getting ready to do a lowering spring or coilover install? Don't re-use your old hardware! VW & Audi chose to use one time use torque-to-yield hardware, also referred to as stretch bolts, for all of the suspension hardware. This hardware is not meant to be re-used.
We have assembled a kit with all the hardware you'll need to refresh the suspension on your car! We source all hardware directly from our local dealership, meaning you're guaranteed a genuine VW / Audi part every time!
Optional Add-Ons:
There are several different ways of attacking this job, and different methods for removal and installation of the front struts will require different hardware. It is a good idea to know which method you are going to use to get the appropriate hardware. Not sure which way to attack it yet? Grab both the outers and inners!
- Base Kit - Our base kit does not include hardware for the axles. This kit is perfect for those who choose to use the 2x4 method for removal and installation of the front suspension.
- Outer Axle Bolts - This option is perfect for those who choose to remove the axle from the hub for removal and installation of the front suspension.
- Inner CV Bolts - This option is perfect for those who choose to remove the axle from the inner CV joint for removal and installation of the front suspension.
Kit Contents:
Genuine VW / Audi Front Strut Pinch Bolt (x2)
Genuine VW / Audi Front Strut Pinch Bolt Nut (x2)
Genuine VW / Audi Front Ball Joint to Control Arm Nut (x6)
Genuine VW / Audi Front Sway Bar End Link Nut (x4)
Genuine VW / Audi Front Strut Mount to Body Bolt (x6)
Genuine VW / Audi Front Strut to Strut Mount Nut (x2)
Genuine VW / Audi Rear Shock to Control Arm Bolt (x2)
Genuine VW / Audi Rear Shock to Control Arm Nut (x2)
Genuine VW / Audi Rear Spindle to Control Arm Bolt (x2)
Genuine VW / Audi Rear Spindle to Control Arm Nut (x2)
Genuine VW / Audi Rear Upper Shock Mount to Body Bolt (x4)
Genuine VW / Audi Rear Shock to Upper Shock Mount Nut (x2)
Genuine VW / Audi Rear Sway Bar End Link to Control Arm Bolt (x2)
Genuine VW / Audi Rear Sway Bar End Link to Control Arm Nut (x2)
Optional Add-Ons:
Genuine VW / Audi Front Axle to Hub Bolt (x2)
Genuine VW / Audi Front Inner CV Joint Bolt (x12)
If you are replacing your front control arms at this time, that hardware is NOT included in this kit and you will need the following as well:
Control Arm to Subframe Bolt (You need 4 of these per vehicle)
Front Control Arm Rear Position Nut (You will need 2 of these per vehicle)
Dogbone Mount Hardware Kit: Dogbone Hardware Kit for 6 Speed Manual & DQ250 DSG | Dogbone Hardware Kit for 7 Speed DQ381 DSG (You will need to disconnect the dogbone mount to remove the front position front control arm mounting bolts)
If you choose to disconnect your tie rod end from the spindle, that hardware is NOT included in this kit and you will need the following as well:
Tie Rod End to Spindle Nut (You will need 2 of these per vehicle)
